How to maintain the deep-well pump in the rainy season

First, for the disabled centrifugal pump, put the pump and hose to the motor shaft, put a net pump and hose inside the water. Then, according to technical requirements, carefully check the pump impeller, bearings, cups and other parts, if any damage should be replaced. Bearings with gasoline wash, coated with butter, and then installed. Pump at the end of the valve, elbow and other cast iron parts, rust to rust, and then coated with butter, on dry place to save, to prepare for winter and spring.

 

Second, deep well pump. If the deep well pump does not need to be used every 7 to 10 days to start running for half an hour to prevent electric motors, starters and other electrical equipment, damp and rusty parts of the pump rotation. If the shutdown time is longer, it should put the pump from the well, for repair, derusting, oiling and for parts, assembled after storage.

 

Third, the motor. Motor long-term need not easily damp, it should be removed from the well down, back to the room, the motor housing dirt wipe clean. On the mechanical part of the intact condition, according to technical requirements for inspection, if the wear parts, to repair or for parts, to meet the technical requirements, and then storage. If the short-term disabled, in the motor and starter, take the oil felt or plastic sheeting, good rain, moisture and dust and so on.

 

Fourth, the diesel engine. Summer and autumn rainy season, placed in the river, the wells do not use the diesel engine, should be promptly carried indoors. According to technical requirements for a thorough examination, maintenance, for parts, oil, so that all parts of the state to maintain intact. Then padded storage, to prepare for winter and spring.